Midnite Solar

The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today. FEATURES: 150 operating voltage Max current out: 96...

The Classic MPPT Charge Controller substantially increases the flexibility, features and range currently found on MPPT controllers. The Classic is the first MPPT controller that has Arc Fault Protection, making this controller the safest available today. FEATURES: 200 operating voltage Max current out: 79...

The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12...

Din Rail Breaker DC - 150 MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. SPECIFY AMP SIZE when ordering. Available sizes: 1, 2, 3, 4, 5,...

Our mini DC breaker box is white powder coated aluminum Mini DC Breaker Box with 175A/125VDC breaker and 5 din rail breaker slots or 3 panel mount breaker slots. Listed by ETL for US & Canada.

Our mini dc breaker box is a white powder coated aluminum chassis Mini DC Breaker Box with 250A/125VDC breaker and 5 din rail breaker slots or 3 panel mount breaker slots. Listed by ETL for US & Canada.

Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. 125VDC 3/8″ studs 1.5″ AIC 50,000 at 125VDC All MidNite circuit breakers hold 100% rated current independent of...

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. SPECIFY AMP SIZE required when ordering. Available sizes: 7, 10, 12, 15, 20, 30, 50 amp 300VDC din...

Baby Box General use aluminum enclosure for 4 panel mount type breakers from 5 – 100 Amp. Not recommended for use with cables larger than awg #4 (19mm). Listed by ETL for US & Canada

Midnite MNP4HV-Disco 3R BSC The MNPV4HV-DISCO 3R-BSC’s red handle is lockable in the off position. Type 3R aluminum enclosure (no rust, won’t turn to dust) 90 degrees Celcius terminals See through dead front & color coded busbar guards included Meets 2011 NEC Load Break...

Midnite MNP4HV-Disco 3R BSC The MNPV4HV-DISCO 3R-BSC’s red handle is lockable in the off position. Type 3R aluminum enclosure (no rust, won’t turn to dust) 90 degrees Celcius terminals See through dead front & color coded busbar guards included Meets 2011 NEC Load Break...

Midnite MNPV6 Disco & 2 x 150V 12A Breakers Midnite MNPV6 Disco enclosure is very versatile and comes in AC and DC versions. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt...

Midnite MNPV6 Disco & 4 x 150V 12A Breakers Midnite MNPV6 Disco enclosure is very versatile and comes in AC and DC versions. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt...

MNPV8HV-DLTL-3R Disco 3R The MidNite Solar MNPV8HV Disco 3R can be re-configured in the field to be used with non-isolated inverters where both the positive and negative need to be disconnected. This also allows these to be used to combine and disconnect two arrays...

Midnite MNPV6 AC Disco Midnite MNPV6 AC Disco enclosure is very versatile. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect. You can also install...

Midnite MNPV6 Disco Midnite MNPV6 Disco enclosure is very versatile and come in AC and DC versions. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie...

Midnite MNPV6 Combiner Enclosure. Gray aluminum type 3R rainproof enclosure with insulating dead front. Includes 15 position PV negative bus bar, 14 position ground bus bar, 120 amp Plus bus bar for breakers and 80 amp bus bar for fuses. For 150 VDC charge...

(MidNite Short Busbar) Shorter version of the insulated bus bars. These are useful for PV+ input on the narrow OB E-Panel and for a separate PV- bus bar for charge controllers that require them. Four #6 and two 1/0 wire slots. Photo shows 3...

Midnight’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. 125VDC 3/8″ studs 1.5″ AIC 50,000 at 125VDC All MidNite circuit breakers hold 100% rated current independent of...

Goes with MNTS fuse holder. The fuses are, Ferraz Shawmut/Mersen brand, industry standard 10mm x 38mm fuses. Please specify size when ordering: MNFUSE01-600V, MNFUSE02-600V, MNFUSE04-600V, MNFUSE06-600V, MNFUSE07-600V, MNFUSE08-600V, MNFUSE10-600V, MNFUSE12-600V, MNFUSE15-600V, MNFUSE20-600V, MNFUSE30-600V CSA Listed & UL listed to UL2579.

Touch Safe Fuse Holder for10x38 mm fuses 600VDC 30 amp Din rail mount. Use in the MNPV combiners for high voltage string inverters. UL & CSA Listed

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring...

The MidNite Solar Surge Protector Device (MNSPD) is a Type 1 device per UL1449 rev3. It is designed for both AC and DC systems and provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring...

Four 1/0 & eleven #6 useable wire slots. Comes with two lengths of 10-32 screws. Both copper and aluminum wire is acceptable for use with these busbars. Photo shows 3 Buss Bars.