2 x 12V 100Ah BBGC2 LiFePO4 Heated Battery Bank

This 100 Ah LiFePO4 Deep Cycle battery is a 12 V battery in a 6 V form factor that provides you with 3000-5000 life cycles* of power for your outdoor adventures.

*Approximately 75-80% of the battery capacity will remain after 3000 cycles in applications recharging at 0.5C or lower We have seen life spans well over 5000 cycles in our lab testing.*

The 10-year warranty makes it hard to beat! Switch out your heavy lead acids for our 31 lbs. battery! It’s time to get rid of that battery anxiety!

Accepted Voltages:

14.2 – 14.6 for Charging Voltage13.6 or lower for float voltage

All batteries ship with 18-8 stainless steel 5/16 – 18 1” and 1 ¼” bolts, brass washers, and 18-8 stainless steel nuts with nylon inserts

Drop-in Battle Born replacement comes along with a 10-year warranty because we want you to know we stand behind you and your investment.

The BBGC2 uses stable LiFePO4 chemical composition in cylindrical cells and the same built-in battery management system (BMS) technology as our other products.

Dimensions: 10.31 × 7.28 × 11.02 in (L x W x H)

Using only the highest quality materials all Battle Born Batteries are designed and assembled in Reno, NV.

Includes:

2/0 Gauge (AWG) Battery Cables is designed for higher amperage applications with a maximum voltage rating of 60 volts DC.

This Battle Born Batteries heated battery kit offers you a 100Ah GC2 Heated Battle Born Battery, 1 Heat Battery Kit, and 1 Heat Battery Jumper Wire.

BBGC2H Battery Specifications:

100 Amp Hour 12 Volt Battery

LiFePO4 Chemistry - Battle Born Internal Heat Technology

3000-5000 Cycles

Dimensions: (L x W x H)

10.31″ x 7.28″ x 11.02″

31 lbs.

Operating Temp Range:

-4°F (-20°C) to 135°F (57.2°C)

Water Resistant and Sealed (Batteries should not be submerged)

Designed and Assembled in the USA

Built-in BMS (Battery Management System)Made with Cylindrical Cells

Items in the Heat Battery Kit Include:

1 -SPST Rocker Switch

1 -25’ 18 AWG wire terminated with 0.187 QD and #8 ring lug

1 -25’ 18 AWG wire terminated with 0.187 QD and 5/16 ring lug

Items in the Add-on Kit include:

1 -14-inch 18 AWG wire terminated with two #8 ring lugs

2 -M4 x 5mm long Philip head screws

1 -#8 ring lug

1 -1-inch piece of shrink wrap